Kansas Heat Pump Rebates

What's available in Kansas

Kansas has a modest but active utility-driven heat pump incentive landscape rather than a statewide tax credit. Evergy, the dominant investor-owned utility, restructured its Kansas residential rebate effective Jan 1, 2026 to a four-tier ASHP schedule — $500 at SEER2 15.2–15.99, $700 at SEER2 16–16.99, $900 at SEER2 17–19.99, and $1,000 at SEER2 20+ — with mini-splits a flat $150 and ground-source heat pumps a flat $1,000. Evergy's published materials carry a general one-rebate-per-measure clause; the August 2026 audit could not find explicit language on any Evergy primary document making the air-source and ground-source rebates mutually exclusive, so treat that as a practical expectation rather than a documented rule and confirm with Evergy before planning to claim both. Black Hills Energy is primarily a Kansas natural-gas utility; previously reported BHE Kansas heat-pump rebate amounts appear to have come from BHE Colorado paperwork and could not be confirmed as Kansas-specific. Kansas Electric Power Cooperative passes per-half-ton rebates through its member co-ops (Sedgwick County Electric, Caney Valley) for both air-source and geothermal heat pumps, capped around $100 per half-ton at the high-efficiency tier. The state-level IRA Home Energy Rebates (HEEHRA and HOMES), administered by the Kansas Corporation Commission Kansas Energy Office, remain in pre-launch status; income-qualified households should monitor the KCC Kansas Home Rebates page. Both federal §25C and §25D credits were repealed effective Dec 31, 2025 — utility rebates are the primary 2026 incentive layer.

HEEHRA in Kansas

HEEHRA rebate: Point-of-sale rebate up to $8,000 for households at or below 80% of area median income. Funded by the IRA, administered by each state. Kansas is finalizing program rules.

How heat pump rebates work in Kansas

Kansas has a modest but active utility-driven heat pump incentive landscape rather than a statewide tax credit. Evergy, the dominant investor-owned utility, restructured its Kansas residential rebate effective January 1, 2026 to a four-tier ASHP schedule — $500 at SEER2 15.2-15.99, $700 at SEER2 16-16.99, $900 at SEER2 17-19.99, and $1,000 at SEER2 20+ — with mini-splits a flat $150 and ground-source heat pumps a flat $1,000. Evergy's Kansas HVAC terms allow only one rebate per qualifying measure, so a single install earns one Evergy heat pump rebate, not both the ASHP and GSHP amounts; Evergy and KEPCo co-op territories do not overlap, so a homeowner claims one or the other, not both. Kansas Electric Power Cooperative (KEPCo) passes per-half-ton rebates through its member co-ops (Sedgwick County Electric, Caney Valley) for both air-source and geothermal heat pumps, capped around $100 per half-ton at the high-efficiency tier. The state-level IRA Home Energy Rebates through the Kansas Corporation Commission Kansas Energy Office remain in pre-launch as of September 2026 (KCC is reviewing updated DOE guidance; no launch date announced) — utility rebates are the primary 2026 incentive layer.

Kansas rebate programs

4 utility-specific programs not shown here. Enter your ZIP in the calculator to filter to just your utility.

A worked example: heat pump retrofit in Wichita

Davis owns a 1,800 sq ft home in Wichita served by Evergy. His 19-year-old electric furnace and central AC are both failing. He gets quotes for a 3-ton ducted air-source heat pump (Trane XV20i, 20 SEER2 / 10 HSPF2) installed at $14,400. Because the install replaces electric resistance heat with a SEER2 20+ ASHP — Evergy's top tier — he qualifies for the full $1,000 Evergy ASHP rebate. He's not in KEPCo territory (KEPCo serves the rural cooperatives, not Evergy customers), so no additional co-op stack applies. His household income is around 105% of Sedgwick County AMI — Kansas HEAR hasn't launched, so the state rebate isn't available. The federal §25C credit is gone. Combined stack: $1,000 against $14,400 installed. Net out-of-pocket: $13,400. The SEER2 20+ tier requires confirming with the AHRI certificate at the quote stage — a 17 SEER2 system would pay $900 ($100 less) for essentially the same equipment cost-difference, so Davis verifies the AHRI rating before signing.

Choosing a contractor in Kansas

Kansas licenses HVAC contractors through municipal building departments rather than statewide — verify the contractor at the city level where the install will happen (Wichita, Topeka, Overland Park, Lawrence, etc.). Evergy's rebate requires the contractor to be Evergy-registered; the contractor files the rebate on the homeowner's behalf through Evergy's portal. KEPCo co-op rebates pass through individual member cooperatives (Sedgwick County Electric, Caney Valley, etc.); each co-op has its own approved contractor list. Ask 'are you registered with [utility name]?' for each rebate you're counting on. The Evergy contractor list is at evergy.com/ways-to-save.

Common pitfalls for Kansas homeowners

• Mixing up ASHP and GSHP rebates. Evergy's ASHP rebate ($500-$1,000 by SEER2 tier) and GSHP rebate (flat $1,000) cover different equipment, and Evergy's materials carry a general one-rebate-per-measure clause — so in practice a single heat pump install earns one of the two, not both. The August 2026 audit could not find explicit mutual-exclusivity language on any Evergy primary document, so treat this as a practical expectation rather than a documented rule and confirm with Evergy if your project somehow involves both system types.
• Confusing Evergy and KEPCo. Evergy is the investor-owned utility serving Kansas City, Wichita, Topeka, and much of eastern Kansas. KEPCo is a wholesale cooperative supplying member retail co-ops in rural Kansas. An Evergy customer is not a KEPCo co-op member and vice versa. The two programs cover mutually exclusive service territories — check your monthly electric bill to confirm.

Estimate your net cost

How to claim each rebate

1. Get pre-approved (where required). Some utility programs require approval before install. Check program details before signing a contract.
2. Use a participating contractor. Many programs require a licensed installer from an approved contractor list — especially HEEHRA, which routes through CEC-approved contractors who process the rebate at point of sale.
3. Save documentation. AHRI certificate, model numbers, and itemized invoice are required for most utility rebates.
4. Submit utility rebate within 60–90 days of install. Some programs are first-come first-served and close mid-year — funding can run out before the calendar year does.

If you can't afford a replacement in Kansas

Rebates lower the price, but they still assume you can pay the rest. If your heating system is unsafe or has failed and a new one is out of reach, these programs repair or replace equipment at low or no cost for income-qualified households. Heat Pump Pricing Index is an independent information site — we don't fund, discount, or install equipment — so these are the doors to knock on first:

• Weatherization Assistance Program (WAP). Free energy and health-and-safety repairs — an unsafe furnace is exactly the kind of problem it fixes — for households at or near 200% of the poverty line. Apply through your local community action agency: how to apply (energy.gov).
• LIHEAP. Heating-bill help plus, in most states, a crisis component for broken or dangerous heating equipment. Same local agency; Kansas LIHEAP contacts.
• USDA Section 504 Home Repair. For homeowners outside cities: 1% loans up to $40,000, and grants up to $10,000 for homeowners 62 and older to remove health and safety hazards. Program page and state offices (rd.usda.gov).
• Your utility and 211. Most electric and gas utilities run an income-qualified assistance fund — call the number on your bill and ask. Dialing 211 reaches a local specialist who knows which agencies in Kansas currently have funds.

Safety first: if a technician has told you a heat exchanger is cracked, stop using the furnace and make sure you have a working carbon monoxide detector before anything else.

FAQ